Ovation-software Label Printer Uživatelský manuál stáhnout pdf (Strana 33)

Printing Labels

Ovation2 25

2.3 Configuration Command String

The configuration command string sets the operating parameters of

the printer. The command strings are described below.

<STX>KDwxy <CR>

where w:

Bit # Function Value

0-2 Baud Rate

0=9600*, 1=600, 2=2400, 3=19200, 4=4800, 5=N/A,

6=1200, 7=9600 Test Mode

3 Word Length 0=8 bits*, 1=7bits

4&5 Unused Set to 0

6 Always 1 Set to 1

7 Always 0 Set to 0

where x:

Bit # Function Value

0 Print Method 0=direct thermal*, 1=thermal transfer

1 Present Sensor 0=not equipped, 1=equipped

2 Alternate Char.

Set

0=standard*, 1=main frame

3 Cutter 0=disabled*, 1=enabled

4&5 Unused Set to 0

6 Always 1 Set to 1

7 Always 0 Set to 0

where y:

Bit # Function Value

0&1 Paper Type 0=gap*(edge), 1=reflective, 2=continuous (3")

2 Unused Set to 0

3-5 Unused Set to 0

6 Always 1 Set to 1

7 Always 0 Set to 0

* = factory defaults

Example: <STX>KD @A@ <CR>

@ Sets the printer to: 9600 baud; 8 bit word length/no parity.

A Sets the printer to: thermal transfer; no present sensor;

standard character set; no cutter.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 65 66

Žádné komentáře

Ovation-software Label Printer Uživatelský manuál Strana 33